NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
Intel® Xeon® processor E5-2600 v3 product family is designed to deliver the best combination of performance, built-in capabilities, and cost-effectiveness. One (or two) of the following Intel® Xeon® E5-2600 v3 processors based on the model.
|
|
Processor
One of the following depending on model
|
Model
|
CPU frequency
|
Cores
|
L3 Cache
|
Power
|
QPI
|
DDR4 Hz
|
E5-2660v3
|
2.6GHz
|
10
|
25MB
|
105W
|
9.6GT/s
|
2133
|
E5-2650v3
|
2.3GHz
|
10
|
25MB
|
105W
|
9.6GT/s
|
2133
|
E5-2650Lv3
|
1.8GHz
|
12
|
30MB
|
65W
|
9.6GT/s
|
2133
|
E5-2640v3
|
2.6GHz
|
8
|
20MB
|
90W
|
8.0GT/s
|
1866
|
E5-2630v3
|
2.4Ghz
|
8
|
20MB
|
85W
|
8.0GT/s
|
1866
|
E5-2630Lv3
|
1.8GHz
|
8
|
20MB
|
55W
|
8.0GT/s
|
1866
|
E5-2623v3
|
3.0GHz
|
4
|
10MB
|
105W
|
8.0GT/s
|
1866
|
E5-2620v3
|
2.4GHz
|
6
|
15MB
|
85W
|
8.0GT/s
|
1866
|
E5-2609v3
|
1.9GHz
|
6
|
15MB
|
85W
|
6.4GT/s
|
1600
|
E5-2603v3
|
1.6GHz
|
6
|
15MB
|
85W
|
6.4GT/s
|
1600
|
|
|
Chipset
One of the following depending on model
|
|
|
|
On System Management Chipset
One of the following depending on model
|
HP iLO (Firmware HP iLO4 2.0) 2GB NAND
NOTE: For more information, visit: http://www.hp.com/go/ilo.
|
|
|
Memory
One of the following depending on model
|
Type:
HP SmartMemory
|
|
DDR4 Registered (RDIMM) or Load Reduced (LRDIMM)
|
|
DIMM Slots Available
|
8
|
(4 DIMM slots per processor, 4 channels per processor, 1 DIMMs per channel)
|
Maximum Capacity (LRDIMM)
|
256GB
|
(8 x 32GB LRDIMM @2133MHz)
|
|
Maximum Capacity (RDIMM)
|
128GB
|
(8 x 16GB RDIMM @2133MHz)
|
|
|
|
|
|
|
|
|
|
Memory Protection
One of the following depending on model
|
Advanced ECC
|
Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.
|
|
Online spare
|
Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.
|
|
|
|
|
Expansion Slots
|
CPU1 PCIe riser slots
|
Expansion Slots #
|
Technology
|
Bus Width
|
Connector Width
|
Bus Number
|
Form Factor
|
Notes
|
1
|
PCIe 3.0
|
x16
|
x16
|
|
Low profile
|
CPU 1
|
|
|
|
CPU1 FlexibleLOM riser slots (Option 1)
|
Expansion Slots #
|
Technology
|
Bus Width
|
Connector Width
|
Bus Number
|
Device Number
|
Form Factor
|
Notes
|
2
|
PCIe 3.0
|
x8
|
x8
|
|
|
Low profile
|
CPU1
|
3
|
Flexible LOM
|
x8
|
x8
|
|
|
Flexible LOM
|
CPU 1 (Can only be used for flexibleLOMs)
|
NOTE: This riser is mandatory for installing FlexibleLOMs.
|
|
CPU1 riser PCIe slots (Option 2)
|
Expansion Slots #
|
Technology
|
Bus Width
|
Connector Width
|
Bus Number
|
Device Number
|
Form Factor
|
Notes
|
2
|
PCIe 3.0
|
x8
|
x8
|
|
|
Low profile slot
|
CPU1
|
3
|
PCIe 3.0
|
x8
|
x8
|
|
|
Full-height, half-length slot
|
CPU1
|
NOTE: Only one of the CPU1 PCIe risers can be selected in any given configuration.
NOTE: One of the CPU1 risers is mandatory for all configurations.
|
|
|
|
Storage Controller
One of the following depending on model
|
Entry Models
|
HP Dynamic Smart Array B140i Controller
|
|
Base Models
|
HP Dynamic Smart Array B140i Controller
|
|
NOTE: B140i provides support for up to 4 SATA drives on DL60 Gen9 and supports RAID 0, 1, 1 + 0 & 5.
|
|
|
Internal Storage Devices
One of the following depending on model
|
Optical Drives
|
Optional: DVD-ROM, DVD-RW
|
|
Hard Drives
|
|
Hard Drive Bays
|
4 LFF drive bays total with Optical bay
|
|
|
|
|
Maximum Internal Storage
One of the following depending on model
|
|
CAPACITY
|
CONFIGURATION
|
Hot Plug LFF SAS
|
24.0TB
|
4 x 6TB
|
Hot Plug LFF SATA
|
24.0TB
|
4 x 6TB
|
Non-Hot Plug LFF SATA
|
2.4TB
|
4 x 600GB
|
Hot Plug LFF SATA SSD
|
6.4TB
|
4 x 1.6TB
|
|
|
|
|
Power Supply One of the following depending on model
|
HP 550W FIO Power Supply
|
HP 800W/900W Gold AC Power Input Module
|
|
HP Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for enterprise class efficiency and reliability while maintaining lowest possible hardware costs. All Entry-Level power supply options have been designed specifically for HP ProLiant Gen9 Essential Series servers.
The HP 550W FIO Power Supply is the standard, non-redundant AC power supply option for most HP ProLiant Gen9 Essential servers. It features Silver-level (89%) certified power efficiency with a set of features optimized for the Gen9 Essential-series rack and tower servers.
The HP 800W Gold (Redundant)/900W (Non-Redundant) AC Power Input Module with Power Backplane can be configured to support power redundancy in ProLiant servers that offer only a single power supply bay, providing additional protection against power loss. With an 80 Plus Gold power efficiency rating (up to 92%), this power option helps to reduce operating expenses while protecting against trapped power capacity in the data center. Each power backplane option can support up to two (2) hot-plug AC power input modules.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HP Power Advisor Tool located at http://www.hp.com/go/hppoweradvisor.
Power specifications and technical content for all HP Server power supplies can be found at http://www.hp.com/go/proliant/powersupply.
|
|
|
System Fans One of the following depending on model
|
|
Non-redundant
|
Redundant
|
1P model
|
3 fans
|
5 fans
|
|
|
Non-redundant
|
Redundant
|
2P model
|
4 fans
|
6 fans
|
NOTE: Redundant fan option kit (PN: 765513-B21) can be bought separately if redundancy is required with 1P or 2P configurations.
NOTE: Additional fans required with 2P configurations are included in "-B21" processor option kits.
|
|
|
|
|
Interfaces
|
|
LOM Network Ports
|
2 x 1GbE ports
|
|
NOTE: The SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD card into the SD slot while the server is powered.
|
USB
|
4 USB ports (standard); Front: 1xUSB 2.0 std; Rear: 2xUSB 3.0 Internal: 1x USB 3.0
|
|
|
|
|
Operating Systems and Virtualization Software Support for ProLiant Servers
|
|
|
|
Upgradeability
One of the following depending on model
|
Upgradeable to two processors (24 cores)
Up to 8 DIMM slots
FlexibleLOM slot for 1Gigabit or 10 Gigabit Ethernet or QDR/FDR InfiniBand networking options
Redundant Power Supply
Redundant Fan
|
|
|
Industry Standard Compliance
|
ACPI 2.0b Compliant
|
PCIe 3.0 Compliant
|
PXE Support
|
WOL Support
|
Microsoft® Logo certifications
|
USB 3.0 Support
|
ASHRAE A3
NOTE: Supports A3 extended ambient temperature.
NOTE: Refer to technical specifications section for more details.
|
|
|
|
Graphics
|
Integrated Matrox G200eH2 video standard
- 1280 x 1024 (32 bpp)
- 1920 x 1200 (16 bpp)
|
|
|
|
HP Server UEFI/Legacy ROM
|
HP Server UEFI /Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration while interacting with your server at boot time. HP ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HP ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hp.com/go/proliantuefi/docs.
UEFI enables numerous new capabilities specific to HP ProLiant servers such as:
- Secure Boot
- Operating system specific functionality
- Support for > 2.2 TB (using GPT) boot drives
- USB 3.0 Stack
- Embedded UEFI Shell
- Mass Configuration Deployment Tool using HP RESTful API.
- PXE boot support for IPv6 networks
- Boot support for option cards that only support a UEFI option ROM
For more information please visit http://www.hp.com/go/proliant/uefi.
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.
NOTE: HP UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory.
|
|
|
Form Factor
One of the following depending on model
|
1U Rack form factor
4LFF version:
1.69" (4.29cm) Height x 17.11" (43.46cm) Width x 23.9" (60.70cm) Length
|
|
|
Embedded Management
|
HP Integrated Lights-Out (HP iLO)
|
Monitor your servers for ongoing management, service alerting, reporting and remote management with HP iLO. Learn more at http://www.hp.com/go/ilo.
|
UEFI
|
Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI). Learn more at http://www.hp.com/go/ProLiant/uefi.
|
HP RESTful API
|
RESTful API is an application programming interface. RESTful Web Service API served by iLO’s web server: Learn more at http://www.hp.com/go/restfulapi.
|
Intelligent Provisioning
|
Provision servers by discovering and deploying 1 to few servers with Intelligent Provisioning. Learn more at http://www.hp.com/go/intelligentprovisioning.
|
Embedded Remote Support
|
HP’s embedded remote support, when used with Insight Online direct connect or HP Insight Remote Support, allows HP ProLiant servers to transmit hardware events directly to HP or an HP Authorized Partner for automated phone home support. Learn more at http://www.hp.com/go/insightonline/info.
|
NOTE: For more information, visit: http://www.hp.com/go/ilo or HP iLO Management Engine technologies whitepaper.
|
|
|
|
|
Server utilities
|
HP Smart Update
|
Optimize firmware and driver updates with HP Smart Update solutions. Learn more at http://www.hp.com/go/smartupdate.
|
HP Systems Insight Manager (HP SIM)
|
HP SIM allows you to monitor the health of your HP ProLiant Servers and HP Integrity Servers, and also provides you with basic support for non-HP servers.
HP SIM also integrates with HP SUM to provide quick and seamless firmware updates. Learn more at http://www.hp.com/go/sim.
|
HP OneView Standard
|
HP OneView Standard can inventory, monitor, alert, and report on your G6, G7, Gen8, and Gen9 servers, while using the HP OneView user interface. Annual support is optionally available. Learn more at http://www.hp.com/go/oneview.
|
Scripting Tool Kit and Windows PowerShell
|
Provision 1 to many servers using your own scripts to discover and deploy them with HP Scripting Tool Kit for Windows and Linux or HP Scripting Tools for Windows PowerShell. Learn more at http://www.hp.com/go/ProLiantSTK or http://www.hp.com/go/powershell.
|
HP RESTful Interface Tool
|
HP RESTful Interface tool is a scripting tool to provision servers using RESTful API Interface to discover and deploy servers at scale. Learn more at http://www.hp.com/go/restfulapi.
|
HP iLO Mobile Application
|
Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hp.com/go/ilo/mobileapp.
|
HP Insight Online
|
HP Insight Online, available at no additional cost as part of your HP warranty, Care Pack or contractual support agreement with HP, is a personalized dashboard for simplified tracking of IT operations and support information from anywhere, anytime. Learn more at http://www.hp.com/go/insightonline/info.
|
|
|
|
Security
|
Power-on password
|
Serial interface control
|
Administrator's password
|
TPM 1.2
|
UEFI
|
|
|
|
|
Warranty
|
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
|
|
|