Product SKUs

MBD-X8DTT-HIBXF-B

X8DTT-H(Bulk Pack)

Physical Stats

Form Factor

Proprietary

Dimensions

16.64" x 6.8 " (42.26cm x 17.27cm)

Processor/Cache

CPU

Dual 1366-pin LGA Sockets

Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:

* Intel® Xeon®Processor 5600 Series (Westmere)
 * Intel® Xeon®Processor 5500 Series (Nehalem-EP)

QPI

up to 6.4 GT/s

System Memory

Memory Capacity

12x 240-pin DIMM sockets

Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory

Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory

Memory Mirroring supported

Memory Type

1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

1GB, 2GB, 4GB

Memory Voltage

1.5 V

Error Detection

Corrects single-bit errors

Detects double-bit errors (using ECC memory)

Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

Chipset

Intel® 5500 (Tylersburg) chipset

ICH10R

SATA

Intel ICH10R SATA 3.0Gbps Controller

RAID 0, 1, 5, 10 support (Windows)

RAID 0, 1, 10 support (Linux)

Network Controllers

Dual Intel® 82574L Gigabit Ethernet Controller

Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

Intel® I/OAT 3 support for fast, scaleable, and reliable networking

VMDq support for better performance of virtualization

Graphics

Matrox G200eW

Super I/O

Winbond W83527HG chip

Clock Generator

932S421 chip

Expansion Slots

PCI-Express

1 (x16) PCI-E 2.0 slot

Input / Output

Serial ATA

Four Serial ATA ports

Four SATA hard drives supported

Note: Requires BPN-827ADP-X8-H adapter

LAN

2x RJ45 LAN ports

USB

2 rear + 1 header (2 Ports)

4 total USB ports, 2.0 Compliant / 1.1 Compliant

VGA

1x VGA Port

Serial Port

1 Fast UART 16550 serial port

System BIOS

BIOS Type

32Mb SPI Flash EEPROM with AMI® BIOS

BIOS Features

Plug and Play (PnP)

PCI 2.2

ACPI up to 3.0

USB Keyboard support

Management

Software

IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support

Super Doctor II

Watch Dog

NMI

Power Configurations

ACPI Power Management

Main Switch Override Mechansim

Power-on mode for AC power recovery

PC Health Monitoring

CPU

Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.

CPU Core 6-Phase-switching voltage regulator

Temperature

Monitoring for CPU and chassis environment

CPU thermal trip support

PSU I²C temperature sensing logic

Thermal Monitor 2 (TM2) support

PECI

LED

Power Fail / Overheat LED

Suspend-state Indicator LED

UID LED

Other Features

SDDC Support

Operating Environment / Compliance

RoHS

RoHS Compliant 6/6, Pb Free

Environmental Spec.

Operating Temperature: 10° to 35° C (50° to 95°F)

Non-operating Temperature: -40° to 70° C (-40° to 158° F)

Operating Relative Humidity: 8% to 90% (non-condensing)

Non-operating Relative Humidity: 5 to 95% (non-condensing)