Processor
|
Model
|
CPU frequency
|
Cores
|
L3 Cache
|
Power
|
QPI
|
DDR4 Hz
|
E5-2699v3
|
2.3GHz
|
18
|
45MB
|
145W
|
9.6GT/s
|
2133
|
E5-2698v3
|
2.3GHz
|
16
|
40MB
|
135W
|
9.6GT/s
|
2133
|
E5-2697v3
|
2.6GHz
|
14
|
35MB
|
145W
|
9.6GT/s
|
2133
|
E5-2695v3
|
2.3GHz
|
14
|
35MB
|
120W
|
9.6GT/s
|
2133
|
E5-2690v3
|
2.6GHz
|
12
|
30MB
|
135W
|
9.6GT/s
|
2133
|
E5-2687Wv3
|
3.1GHz
|
10
|
25MB
|
160W
|
9.6GT/s
|
2133
|
E5-2683v3
|
2.0GHz
|
14
|
35MB
|
120W
|
9.6GT/s
|
2133
|
E5-2680v3
|
2.5GHz
|
12
|
30MB
|
120W
|
9.6GT/s
|
2133
|
E5-2670v3
|
2.3GHz
|
12
|
30MB
|
120W
|
9.6GT/s
|
2133
|
E5-2667v3
|
3.2GHz
|
8
|
20MB
|
135W
|
9.6GT/s
|
2133
|
E5-2660v3
|
2.6GHz
|
10
|
25MB
|
105W
|
9.6GT/s
|
2133
|
E5-2650v3
|
2.3GHz
|
10
|
25MB
|
105W
|
9.6GT/s
|
2133
|
E5-2650Lv3
|
1.8GHz
|
12
|
30MB
|
65W
|
9.6GT/s
|
2133
|
E5-2643v3
|
3.4GHz
|
6
|
20MB
|
135W
|
9.6GT/s
|
2133
|
E5-2640v3
|
2.6GHz
|
8
|
20MB
|
90W
|
8.0GT/s
|
1866
|
E5-2637v3
|
3.5GHz
|
4
|
15MB
|
135W
|
9.6GT/s
|
2133
|
E5-2630v3
|
2.4Ghz
|
8
|
20MB
|
85W
|
8.0GT/s
|
1866
|
E5-2630Lv3
|
1.8GHz
|
8
|
20MB
|
55W
|
8.0GT/s
|
1866
|
E5-2623v3
|
3.0GHz
|
4
|
10MB
|
105W
|
8.0GT/s
|
1866
|
E5-2620v3
|
2.4GHz
|
6
|
15MB
|
85W
|
8.0GT/s
|
1866
|
E5-2609v3
|
1.9GHz
|
6
|
15MB
|
85W
|
6.4GT/s
|
1600
|
E5-2603v3
|
1.6GHz
|
6
|
15MB
|
85W
|
6.4GT/s
|
1600
|
|
|
|
|
|
|
On System Management Chipset
|
HP iLO (Firmware HP iLO4 2.0) 4GB NAND
NOTE: 1GB USB user space configurable via UEFI and accessible via iLO. Read and learn more in the iLO QuickSpecs.
|
|
|
|
|
|
Memory
One of the following depending on model
|
Type:
HP SmartMemory
|
|
DDR4 Registered (RDIMM) or Load Reduced (LRDIMM)
|
|
DIMM Slots Available
|
24
|
(12 DIMM slots per processor, 4 channels per processor, 3 DIMMs per channel)
|
Maximum Capacity (LRDIMM)
|
1.5TB
|
(24 x 64GB LRDIMM @2133MHz)
|
|
Maximum Capacity (RDIMM)
|
768GB
|
(24 x 32GB LRDIMM @2133MHz)
|
|
|
|
|
|
|
|
|
|
|
Memory Protection
|
Advanced ECC
|
Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.
|
|
Online spare
|
Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.
|
|
|
|
|
|
Expansion Slots
|
|
Primary Riser
|
Expansion Slots #
|
Technology
|
Bus Width
|
Connector Width
|
Bus Number
|
Form Factor
|
Notes
|
1
|
PCIe 3.0
|
x16
|
x16
|
|
Full-height, ¾ length (up to 9.5") Slot
|
Processor 1
|
2
|
PCIe 3.0
|
x8
|
x8
|
|
Low profile slot
|
Processor 1
|
NOTE: Bus Width indicates the number of physical electrical lanes running to the connector.
|
|
|
|
Secondary Riser
|
Expansion Slots #
|
Technology
|
Bus Width
|
Connector Width
|
Bus Number
|
Device Number
|
Form Factor
|
Notes
|
3
|
PCIe 3.0
|
x16
|
x16
|
|
|
Low profile
|
Processor 2
|
3
|
PCIe 3.0
|
x16
|
x16
|
|
|
Full-height, ¾ length (up to 9.5") Slot
|
Processor 2*
|
*PCI-E Slot 2 cannot be used in conjunction with the FH/¾ Length option kit (744644-B21)
|
|
|
|
|
|
Storage Controller
One of the following depending on model
|
Entry Models
|
HP Dynamic Smart Array B140i Controller
|
|
|
Base Models
|
HP H240ar Smart Host Bus Adapter
|
|
|
Performance Models
|
HP Flexible Smart Array P440ar/2GB
|
|
|
|
|
|
|
Internal Storage Devices
One of the following depending on model
|
Optical Drives
|
8 SFF with optional Universal Media bay
NOTE: Option Kit 764632-B21 VGA, USB 2.0, and DVD-RW kit.
|
4 LFF
NOTE: Two option kits available for optical drive: 726536-B21 or 726537-B21; Optical cable kit required for optical drives: 766203-B21.
|
|
Hard Drives
|
|
Hard Drive Bays
|
8 SFF with optional Universal Media bay
|
4 LFF
|
10 SFF; 8 SFF Model with optional 2 SFF SAS/SATA kit: 764630-B21
NOTE: HP ProLiant DL360 Series servers offer both SFF and LFF Models.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard drive blanks, they can order more using either P/N 666987-B21: HP SFF Hard Drive Blank Kit or P/N 666986-B21: HP LFF Hard Drive Blank Kit. These part numbers for single HDD blanks below are also provided should the customer require replacement HDD blanks for their server.
|
|
|
|
|
|
Maximum Internal Storage
|
|
CAPACITY
|
CONFIGURATION
|
Hot Plug SFF SAS SSD
|
19.2TB
|
10x1.92TB
|
Hot Plug SFF SATA SSD
|
9.6TB
|
10x960GB
|
Hot Plug LFF SATA SSD
|
3.84TB
|
4x960GB
|
Hot Plug LFF SAS SSD
|
6.4TB
|
4x1.6TB
|
Hot Plug SFF SAS
|
20.0TB
|
10x2.0TB
|
Hot Plug SFF SATA
|
20.0TB
|
10x2.0TB
|
Hot Plug LFF SAS
|
32.0TB
|
4x8TB
|
Hot Plug LFF SATA
|
32.0TB
|
4x8TB
|
|
|
|
|
Power Supply
One of the following depending on model
|
HP 500W Flex Slot Platinum Hot Plug Power Supply
NOTE: Available in 94% efficiency
|
HP 800W Flex Slot Platinum Hot Plug Power Supply
NOTE: Available in 94% and 96% efficiency
NOTE: Also available in -48VDC and 227VAC/380VDC power inputs
|
HP 1400W Flex Slot Platinum Plus Hot Plug Power Supply
NOTE: Available in 94% efficiency
|
HP Flexible Slot Battery Backup Unit Kits
NOTE: Flex Slot Battery Backup provides 750W output and 500W in paralleled configuration
|
HP Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HP ProLiant Gen9 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HP Power Advisor Tool located at http://www.hp.com/go/hppoweradvisor.
Power specifications and technical content for all HP Server power supplies can be found at http://www.hp.com/go/proliant/powersupply.
|
|
|
|
System Fans
One of the following depending on model
|
|
Non-redundant
|
Redundant
|
1P model
|
N/A
|
5 fans
|
|
|
Non-redundant
|
Redundant
|
2P model
|
N/A
|
7 fans
|
NOTE: The second processor option kit contains two fans.
NOTE: High Performance Fan Kit, 766201-B21, is available to meet some extended ambient operating temperatures above 35° C. Qualifications for extended ambient configurations are detailed at: https://www.hp.com/servers/ashrae.
|
|
|
|
|
|
Interfaces
|
NOTE: Optional kit: 764646-B21.
|
Video
|
1 rear (Standard) 1 front (Optional)
|
NOTE: Front VGA options available for 8SFF and 4LFF models as detailed in the core options section of this QuickSpecs.
|
Network RJ-45 (Ethernet)
|
Both the SFF and LFF Models have an embedded 4x1GB NIC and a FlexibleLOM bay. (See HP Networking section below for more details and options).
|
|
HP iLO Remote Management Network Port
|
1Gb Dedicated
|
|
SD Connector
|
1 micro SD Internal
|
NOTE: The SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD card into the SD slot while the server is powered.
|
USB 3.0
|
5 total: 2 rear, 1 front, 2 internal
|
|
|
|
|
|
Operating Systems and Virtualization Software Support for ProLiant Servers
|
|
|
|
|
Upgradeability
|
Upgradeable to two processors (36 Cores)
|
Up to 24 DIMM slots available for higher Memory capacity
|
Up to 10 SFF Hard Drive Bays; or 4 LFF Hard Drive Bays
|
FlexibleLOM slot for 1Gigabit or 10 Gigabit Ethernet or QDR/FDR InfiniBand networking options
|
3 PCIe 3.0 I/O slots for additional communications and storage expansion
NOTE: Slot 1 and 2 Riser Shipped Standard, Slot 3 Optional 1 FH / ¾ length and two Low Profile slots available (shown) or two FH/ ¾ length slots.
|
Redundant Power Supplies
|
Optical Drive supported via Universal Media Bay
NOTE: 8SFF Model via VGA, USB 2.0 and DVD-RW Option kit: 764732-B21; 4LFF Model via DVD-RW 726537-B21, DVD 726536-B21 and the Optical Cable: 766203-B21.
|
|
|
|
|
Industry Standard Compliance
|
ACPI 2.0b Compliant
|
PCIe 3.0 Compliant
|
PXE Support
|
WOL Support
|
Microsoft® Logo certifications
|
USB 3.0 Support
|
Energy Star
|
ASHRAE A3/A4
NOTE: The DL360 Gen9 is now one of the first HP ProLiant Gen9 Servers with Extended Ambient Support up to 45 C for data center infrastructures designed for better energy efficiency such as but not limited to fresh air cooling.
For additional technical thermal details regarding ambient temperatures, humidity and features support please visit https://www.hp.com/servers/ashrae.
|
|
|
|
|
Graphics
|
Integrated Matrox G200 video standard
- 1280 x 1024 (32 bpp)
- 1920 x 1200 (16 bpp)
|
|
|
|
|
HP Server UEFI/Legacy ROM
|
HP Server UEFI /Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration while interacting with your server at boot time. HP ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HP ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hp.com/go/proliantuefi/docs.
UEFI enables numerous new capabilities specific to HP ProLiant servers such as:
- Secure Boot
- Operating system specific functionality
- Support for > 2.2 TB (using GPT) boot drives
- USB 3.0 Stack
- Embedded UEFI Shell
- Mass Configuration Deployment Tool using HP RESTful API.
- PXE boot support for IPv6 networks
- Boot support for option cards that only support a UEFI option ROM
For more information please visit http://www.hp.com/go/proliant/uefi.
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.
NOTE: HP Legacy FIO Mode Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory.
|
|
|
|
Form Factor
One of the following depending on model
|
1U Rack form factor
8 SFF Drive Bay Version and 10 SFF Drive Bay Version: 1.7" (4.32cm) Height x 17.11" (43.47cm) Width x 27.5" (69.85cm) Length
4 LFF Drive Bay Version: 1.7" (4.32cm) Height x 17.11" (43.47cm) Width x 29.5" (74.67cm) Length
|
|
|
|
Embedded Management
|
HP Integrated Lights-Out (HP iLO)
|
Monitor your servers for ongoing management, service alerting, reporting and remote management with iLO. Learn more at http://www.hp.com/go/ilo.
|
UEFI
|
Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI). Learn more at http://www.hp.com/go/ProLiant/uefi.
|
HP RESTful API
|
RESTful API is an application programming interface. RESTful Web Service API served by iLO’s web server. Learn more at http://www.hp.com/go/restfulapi.
|
Intelligent Provisioning
|
Provision servers by discovering and deploying 1 to few servers with Intelligent Provisioning. Learn more at http://www.hp.com/go/intelligentprovisioning.
|
Embedded Remote Support
|
HP’s embedded remote support, used with Insight Online direct connect or HP Insight Remote Support, allows HP ProLiant servers to transmit hardware events directly to HP or an HP Authorized Partner for automated phone home support. Learn more at http://www.hp.com/go/insightonline/info.
|
|
|
|
|
|
Server utilities
|
HP Smart Update
|
Optimize firmware and driver updates with HP Smart Update solutions. Learn more at http://www.hp.com/go/smartupdate.
|
HP Systems Insight Manager (HP SIM)
|
HP SIM allows you to monitor the health of your HP ProLiant Servers and HP Integrity Servers, and also provides you with basic support for non-HP servers.
HP SIM also integrates with HP SUM to provide quick and seamless firmware updates. Learn more at http://www.hp.com/go/sim.
|
HP OneView Standard
|
HP OneView Standard can inventory, monitor, alert, and report on your G6, G7, Gen8, and Gen9 servers, while using the HP OneView user interface. Annual support is optionally available. Learn more at http://www.hp.com/go/oneview.
|
Scripting Tool Kit and Windows PowerShell
|
Provision 1 to many servers using your own scripts to discover and deploy them with HP Scripting Tool Kit for Windows and Linux or HP Scripting Tools for Windows PowerShell. Learn more at http://www.hp.com/go/ProLiantSTK or http://www.hp.com/go/powershell.
|
HP RESTful Interface Tool
|
HP RESTful Interface tool is a scripting tool to provision servers using RESTful API Interface to discover and deploy servers at scale. Learn more at http://www.hp.com/go/restfulapi.
|
HP iLO Mobile Application
|
Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hp.com/go/ilo/mobileapp.
|
HP Insight Online
|
HP Insight Online, available at no additional cost as part of your HP warranty, Care Pack or contractual support agreement with HP, is a personalized dashboard for simplified tracking of IT operations and support information from anywhere, anytime. Learn more at http://www.hp.com/go/insightonline/info.
|
|
|
|
Security
|
Power-on password
|
Keyboard password
|
QuickLock, Network Server Mode
|
Serial interface control
|
Administrator's password
|
iLO 4 (Integrated Lights-Out 4) has 12 customizable user accounts and SSL encryption
|
iLO 4 can be disabled via a Global Setting
|
iLO Advanced supports directory services integration
|
TPM 1.2
|
UEFI
|
|
|
|
|
Warranty
|
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
|
|